Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Metrotech
  • Model:
    9860 XT

View Manufacturers View Models

Additional Info

RECEIVER
Receiving Frequencies -
Active: 9.8 kHz and 82 kHz
Passive: 50/60 Hz and 14-22 kHz
Depth Readout Accuracy: ± 5% + 2" under normal conditions
Distance Sensitive Left/Right Guidance
Real-Time Continuous Gain Adjustment
Manual Gain/Peak Mode
Current Measurement
Backlighting: Standard
Serial Link: RS232
Battery Type: Six AA Cells
Battery Life: 30 hours continuous use / 24 hours continuous backlit use
Battery Check Temperature: Continuous Automatic
Operation Temperature: -4º to + 122º F (-20º to + 50º C)

Dimensions: 27" L x 7" W x 9" H (68.6 cm x 17.8 cm x 22.9 cm)
Weight: 5.24 lbs (2.35 kg)


TRANSMITTER
Output Frequency -
Active: 9.8 kHz and 82 kHz
Optional: Optional 4.8 Hz for simultaneous sheath fault locating
Simultaneous Frequency Output: 9.8 kHz and 82 kHz
Automatic "best" Frequency Selection
Ohm Meter: 0-2 kOhm
Nominal Output Power Conductive Mode: 3 watts (output power limited to 0.7W at 82kHz)
Power Settings: Low, Medium, High
Battery Type: 10 D Cells, Optional Rechargeable NiCd
Battery Life -
Alkaline: 28 to 70 hours
NiCd: 9 to 22 hours
Continuous use depending on power and frequency selection
Battery Check: Automatic at start-up
Operation Temperature: -4º to + 122º F (-20º to + 50º C)

Dimensions: 14.25" L x 9.25" W x 5.25" H (36.2 cm x 23.5 cm x 13.3 cm)
Weight: 8.9 lbs (4 kg)

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x