Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D1000X900
  • Rig Size:
    200,000 lbs pullback and over

View Manufacturers View Models

Specifications

Length 20' 6.1 m
Max Carriage Speed 71 fpm 21.6 m/min
Max Spindle Speed 38 rpm 38 rpm
Rated Engine RPM 2000 RPM 2000 RPM
Manufacturer's Gross HP Rating 800 HP 597 kw
Width 8.5' 2.6 m
Hydraulic Tank Capacity 720 gal 2725.5L
Height 38.4" 97.5 cm
Pullback 985,100 lb 4,381.9 kN
Thrust 985,100 lb 4,381.9 kN
Emissions Compliance Tier 3 (EU Stage IIIA) Tier 3 (EU Stage IIIA)
Fuel Tank Capacity 500 gal 1892.71L
Fuel Type Diesel
Max Spindle Torque 99,400 ft-lb 134,768.3 Nm
Make and Model CAT C-27 ACERT
Entry Angle 10° - 15° (17.5% - 26.2%)
Weight 95,600 lb 43,363.4 kg

Additional Info

DRILL RACK
Min transport length: 50.3' (15.3 m)
Width: 8.5' (2.6 m)
Min transport height: 11.5' (3.5 m)
Weight: 95,600 lb (43,363.4 kg)
Suspension: Triple axle with air ride suspension
Front base anchor length: 20' (6.1 m)
Front base anchor width: 6' (1.8 m)
Front base anchor height: 38.4" (97.5 cm)
Front small anchor length: 10.5' (3.2 m)
Front small anchor width: 5.5' (1.7 m)
Front small anchor height: 22.8" (57.9 cm)
Rear base anchor length: 16'(4.9 m)
Rear base anchor width: 7.8' (2.4 m)
Rear base anchor height: 15.6" (39.6 cm)
Drill rack angle: 10° - 15° (17.5% - 26.2%)

DRILLER’S CABIN
Length: 11.6' (3.5 m)
Width: 7.9' (2.4 m)
Height: 8' (2.4 m)
Weight: 7800 lb (3538 kg)
Heat and air conditioning: 3 ton (10.6 kW) in-wall combination unit

POWER PACK OPTION ONE
Make and model: (1) CAT C-27 ACERT
Fuel type: Diesel
Fuel capacity: 500 gal (1892.7 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 800 hp (597 kW)
EPA certification family: Tier 3 (EU Stage IIIA)

POWER PACK OPTION TWO
Make and model:(2) CAT C-18 ACERT
Fuel type: Diesel
Fuel capacity: 1000 gal (3785.4 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 1200 hp (895 kW)
EPA certification family: Tier 3 (EU Stage IIIA) or Tier 4 Final (EU Stage IV)

POWER PACK OPTION THREE
Make and model: (2) CAT C-27 ACERT
Fuel type: Diesel
Fuel capacity: 1000 gal (3785.4 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 1600 hp (1193 kW)
EPA certification family: Tier 3 (EU Stage IIIA)

OPERATIONAL
Thrust/Pullback: 985,100 lb (4,381.9 kN)
Max spindle torque: 99,400 ft-lb (134,768.3 Nm)
Max spindle speed at max engine rpm (with PS800): 38 rpm
Max spindle speed at max engine rpm (with PS1200/PS1600): 57 rpm
Max carriage speed at max engine rpm: 71 fpm (21.6 m/min)
Number of rotation motors: 1
Number of drive motors: 4
Mud swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout torque: 147,500 ft-lb (199,983.1 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lb (1723.7 kg)
Travel: 6' (1.8 m)
Inside diameter: 10" (25.3 cm)

UPPER BREAKOUT VISE
Clamp force: 176,000 lb (782.8 kN)
Configuration: 2-jaw clamp
Inside diameter: 10" (25.4 cm)

SAFETY
Remote lockout: Yes
Strike alert: Yes

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x