Cerca

Descripción general:
2019 Vermeer D20x22 S3 Directional Drill:
-3,000 hours

Tubo:
(38) Drill Rods included.

Trabajos/modificaciones recientes:
Seller States: Tracks were replaced at 2,500 hours.

Información adicional:
MANUFACTURES EQUIPMENT SPECIFICATIONS

-Make/Model: Deutz TD2.9
-Fuel Type: Low Sulfur Diesel
-Maximum Engine rpm: 2600 rpm
-Gross Horsepower: 74 hp (55.4 kW)
-Displacement: 177 cu in (2.9 L)
-Cooling Method: Liquid
-Aspiration: Turbocharged
-Noise Level at Operator's Ear: 86.5 dB(A)
-Emissions Rating: Tier 4i (EU Stage IIIA)
-Thrust/Pullback: 19,500 lb (86.7 kN)
-Maximum Carriage Speed at Maximum Engine rpm: 160 fpm (48.8 m/min)
-Maximum Spindle Torque (low at max engine rpm): 2200 ft-lb (2983 Nm)
-Maximum Spindle Speed at Maximum Engine rpm: 250 rpm
-Minimum Bore Diameter: 3" (7.6 cm)
-Maximum Ground Drive Speed at Maximum Engine rpm (fwd): 3.3 mph (5.3 km/h)
-Drill Rack Angle: 12°-17° (21%-30.6%)
-Breakout System: Standard Hydraulic Vise
-Drilling Lights: Optional
-Flow Indicator: Standard
-Stakedown System: Standard
-Strike Alert: Standard
-Remote Lockout: Standard
-Pipe: Firestick Drill Rod
-Length: 10' (3 m)
-Rod Diameter: 1.9" (4.8 cm)
-Weight: 55 lb (24.9 kg)
-Bend Radius: 98.7' (30.1 m)
-Onboard Capacity: 400' (121.9 m)
-Basket Holds: 32 rods