Esta página ha sido traducida usando Google Translate
Biblioteca de especificaciones de equipos
Información básica del modelo
-
Fabricante:HammerHead
-
Modelo:HB3038
Información adicional
The HB3038 system is highly efficient, simple to set up, easy to operate and leaves a small foot print for the down hole unit. HB3038 systems are fast, a typical 400' (122 m) job takes only a two hour round trip from payout to completion.
HB3038 machines feature quick replacement jaw inserts, on
board pressure gauges and an auto rod grip and release feature. All HammerHead static pipe bursting systems feature torqued joint rods that have been proven in oil field and directional drilling for decades under
thrust, pullback and bend radii conditions.
DOWN HOLE UNIT AND RODS
Pipe Replacement Range - in (mm): 2 - 6 (50 - 150)
Rig Size L/W/H - in (cm): 60/20/12 (152/51/30)
Minimum Pit Size L/W/H - in (cm):
80/20/7 below pipe center line
(213/51/18 below pipe center line)
Weight - lb (kg): 762 (345)
Max. Pulling Force: 38 tons
Shuttle speed (no load, one cycle, aprox 1 m rod):
18 seconds
Rod Diameters - in (cm):
a. 1.38" (35 mm)
b. 1.75" (45 mm)
Rod Lengths - in (cm):
a. 39.38 (100 )
b. 39.38 (100)
Rod Weights - lb (kg):
a. 17.2 (7.8)
b. 27 (12.2)
SPECIFICATIONS - HYDRAULIC POWER PACK
Engine: Kubota 20.3 HP (15.1 kw) @ 2,800 RPM
Pump Flow - gpm (L/min): 24 (91) @ 2,800 RPM
Max. Hydraulic Pressure - psi (bar): 3,000 (207)
Rig Size L/W/H - in (cm): 52.5/23.5/41.5 (133/60/105)
Weight - lb (kg): 690 (313)
HB3038 machines feature quick replacement jaw inserts, on
board pressure gauges and an auto rod grip and release feature. All HammerHead static pipe bursting systems feature torqued joint rods that have been proven in oil field and directional drilling for decades under
thrust, pullback and bend radii conditions.
DOWN HOLE UNIT AND RODS
Pipe Replacement Range - in (mm): 2 - 6 (50 - 150)
Rig Size L/W/H - in (cm): 60/20/12 (152/51/30)
Minimum Pit Size L/W/H - in (cm):
80/20/7 below pipe center line
(213/51/18 below pipe center line)
Weight - lb (kg): 762 (345)
Max. Pulling Force: 38 tons
Shuttle speed (no load, one cycle, aprox 1 m rod):
18 seconds
Rod Diameters - in (cm):
a. 1.38" (35 mm)
b. 1.75" (45 mm)
Rod Lengths - in (cm):
a. 39.38 (100 )
b. 39.38 (100)
Rod Weights - lb (kg):
a. 17.2 (7.8)
b. 27 (12.2)
SPECIFICATIONS - HYDRAULIC POWER PACK
Engine: Kubota 20.3 HP (15.1 kw) @ 2,800 RPM
Pump Flow - gpm (L/min): 24 (91) @ 2,800 RPM
Max. Hydraulic Pressure - psi (bar): 3,000 (207)
Rig Size L/W/H - in (cm): 52.5/23.5/41.5 (133/60/105)
Weight - lb (kg): 690 (313)
Esta información se proporciona solo con fines informativos. HDD Broker, Inc. no puede garantizar la exactitud o integridad de esta información. Esta información está sujeta a cambios por parte del fabricante. Algunas especificaciones pueden variar según el año del modelo.